Volumetric Flow Rate Converter
Convert a volume measured per unit of time. Choose litres per minute, US liquid gallons per minute, cubic metres per second, or cubic feet per second.
How the conversion works
Multiply the entered value by the source unit's factor, then divide by the target unit's factor. The factors below are in m³/s.
| Unit | Symbol | Factor in m³/s |
|---|---|---|
| Litre per minute | L/min | 0.001 / 60 |
| US liquid gallon per minute | US gal/min | 0.0000630901964 |
| Cubic metre per second | m³/s | 1 |
| Cubic foot per second | ft³/s | 0.028316846592 |
- 10 US gal/min = 37.85411784 L/min.
- 1 ft³/s = 0.028316846592 m³/s.
Keep the volume basis and flow direction
This converter uses the US liquid gallon of 3.785411784 L. Check the gallon definition in the source before entering a rate. Stream discharge may be reported in cubic feet per second, while a device label can express volumetric flow per minute.
Use the same temperature and pressure basis on both sides when converting a gas volume rate. Changing that basis needs additional information. A mass flow calculation also requires density under the applicable conditions. Signed values preserve the flow direction convention used in the source.